Wednesday, January 16, 2019

mid month potholder LOVE

midmonth potholders

For this month’s potholders I was thinking of LOVE!

I always try to think ahead a month when making these and this time I got a new die from Accuquilt that I was dying to use!

Here’s what you’ll need for these potholders:

The 8” QUBE set (shapes 1,2,4,5)

and queen of hearts die

And then scraps of white, white and red print and red.

I was able to cut everything out of a WOF to fit the dies (see below)

IMG_20190114_082148660

From the white I cut a 5” WOF and cut out (4) of shape #1 the large square, I also cut 2 1/2” x 5” (x2) for hanging straps

From the white and red print I cut 3 3/4” WOF and cut out (32) of shape #5 (I had to cut 2 strips but you may be able to just use one!)

Then in red I cut a 5 3/4” WOF strip and cut out (16) of #4 and (16) of die #2

IMG_20190114_083527777

I also cut out two small hearts after backing some scraps of the red and white print with steam a seam lite2

IMG_20190114_084125819

Then ironing those two onto two of the white squares, holding down the iron for OVER 20 seconds! If you don’t, the glue won’t melt all the way and it might gum up your sewing machine needle. Don’t ask me how I know!! Winking smile

IMG_20190114_084238588

While the iron was hot I ironing the hanging strips and then I sewed those together and also made 16 flying geese units and free motion appliqued the two heart blocks

IMG_20190114_112757331

Then I sewed the flying geese to the top and bottom of all 4 white squares and also added the small squares to the rest of the flying geese like this

IMG_20190114_113742596

and soon enough I had two sets of star blocks like this, one set of two with the heart in the middle and two that were blank

IMG_20190114_114520892

I first laid down scraps of batting that were bigger than 8.5” then pieces of insulbright then the front star blocks with the hearts, then pinned the hanging tags at the top in the middle and then the backing star block right side down, so the two blocks are right sides together, I pinned around

IMG_20190114_115139506

Then sewed 1/4” around with the walking foot and leaving an opening at the bottom, I trimmed the batting and the corners and then turned right side out and pressed the opening so it was easier to see how the fabric should fold/ go together.

IMG_20190114_115828191

Then whip stitched them closed in red thread and VOILA! they’re done!

IMG_20190114_120741333

This star block is one of my favorite blocks and it was block #1 in the QAL I’m hosting with Accuquilt dies Smile

4 comments:

Gene Black said...

I love star blocks. These look great and potholders are always needed in the kitchen.

Jennifer Schifano Thomas said...

These would be adorable for Valentine's Day!

QuiltShopGal said...

Too cute. Great idea.

FlashinScissors said...

They are gorgeous, Bea!
I could definitely do with a new potholder ..... another project for my list! Tee hee!
Barbara xx