Friday, September 14, 2018

Mid month potholders and rug!

midmonth potholders
This month’s potholder is a bit different and to show you how I did it, I took pictures of the technique while making a rug!
I’m sure you might have heard of the new buzz for jelly roll rugs and 2 1/2” strips of batting now too!
I’ve just watched a bit of a youtube video and I know how to make coiled baskets and also how to make the baskets by folding over the edges instead of winding it around, and doing it on batting instead of cording is easy too!
A few weeks ago a CERTAIN little 2yr old (not mentioning any names ANJA!) got into my shelf of fabrics and unwrapped the jelly roll! – oh the horror!!
So I knew I wanted to use it up soon before it got tangles/split up more.
IMG_20180830_161322686
Then first thing I did was to sew the ends together by laying two pieces right sides together at an angle and sewing diagonally, at first you have to look at it and flip it to make sure you’re doing it right and not make a mitered corner instead Winking smile I didn’t worry about the selvedge edges as it all gets trimmed off anyways.
IMG_20180830_161752962
a while later I had this pile!
IMG_20180830_163052002
Then my big AHA! moment was when I decided (and found out in the accuquilt FB group) that it doesn’t hurt the blades on the GO die to cut batting! (your mat might get fuzzy, but it wasn’t bad at all and I started with a worn mat anyways, I’ve replaced my rotary mat more often I think because I cut batting on there and the blade pushed the batting into the cut groove on the mat, on this mat it was NOTHING!
I have piled of small pieces of batting, that might be wide enough but then only 10-15” so it’s tricky to use those.
Here I double folded a piece of batting and ran it thru the machine, so each piece was roughly between 35” x 45” long, some I had to trim because they were too long, but not many.
I used the 2 1/2” strip die that cuts out 3 strips at a time
IMG_20180830_163804658_HDRIMG_20180830_164719990_HDR
Since my jelly roll had 40 pieces or maybe 42? I cut out 40 batting strips (I only had ONE left over at the end!)
IMG_20180830_170717415_HDR
with the fabric strips I trimmed the seams and ironed open.
IMG_20180830_164156761_HDR
Then the tedious part! Laying a piece of batting on top of the strip (at the beginning I folded over the raw edge
IMG_20180830_182209767_HDR
Then like bias binding, I folded the sides toward the middle and then folded the middle in half and then I clipped it with wonder clips, I did as much as I could until I ran out of clips.
IMG_20180830_182407109
If a batting strip ended I just butted them up against another one and clipped it right on the seam so it wouldn’t shift while I sewed
IMG_20180830_182828381
Here’s what I managed to do in one sitting
IMG_20180830_183341672_HDR
Then with a walking foot I stitched close to the edge all the way until the clips ran out, then cut the threads and clipped another section
Of course since I CERTAIN little one was the start of it, she had to help me too, she sat in my lap and took the clips off, she would however try to pull instead of push down on the clip to open it, so I quickly figured out how to open it actually with my left hand, since I was holding everything with my right hand and Anja would take the clip and put it in the container
IMG_20180831_190224949_HDR
a great help!
IMG_20180831_190214622
Here’s what I had after a few rounds, this part took a few hours I think total, I had to split it up between two nights (after spending 6 hrs at the local DMV to get my son his driver’s PERMIT!)
IMG_20180830_201446645
Here’s everything done!
IMG_20180831_201739577
My machine comes with an extension table so I put that on, since it sits on a dining table, it’s really not a good height to have the table on it all the time, but for this project you want a flat surface.
IMG_20180901_081242631
At this point I zig zagged it together, I fold maybe 12” or so, well not folded but carefully turned it at the ends, at first my thread kept skipping, then I changed the thread which helped a bit, BUT my biggest FIX was to change to a larger needle!! then it worked like a charm!
IMG_20180901_082221775_HDR
I kept stitching and carefully turning at the ends and keeping it flat!
IMG_20180901_082455922_HDR
at this point I ran out of bobbin thread so I took a picture
IMG_20180901_082857453_HDR
and another bobbin
IMG_20180901_084542873
and another
IMG_20180901_085920945
Here’s the whole rug done!
do you see the problem??? it’s not lying flat!!
I had a feeling too as it got HUGE and was heavy too, it was hard to maneuver on the machine, well lesson learned, it’s a play mat for the kids, as the wooden chest if filled with LEGOs so it’ll be nice to be on something soft when they play
IMG_20180901_092528569
Now onto the potholder!
I wanted to make a potholder or more like a coaster with this same technique. So I got out one fat quarter
IMG_20180901_153739924_HDR
folded it in half and cut out (6) strips on the 2 1/2” die.
IMG_20180901_153929948
with the long batting double folded I cut out 3 strips
IMG_20180901_154108383
then in the same way sewed the ends together at an angle
IMG_20180901_154532750_HDR
and clipped them
IMG_20180901_154831279_HDR
I was able to clip everything and have some clips leftover!
IMG_20180901_155446710
Then sewed the seam on all of it
IMG_20180901_160205438
starting with a circle is very fiddly and tricky but just in the beginning.
Just start slow!
IMG_20180901_160552444_HDR
and before long the trivet/coaster is done!
About an 9” circle!
compared to the big rug above, this one was easy peasy and took no time at all!
IMG_20180901_161015753
So if you’re curious about these jelly roll rugs, try out with batting scraps and a fat quarter, this way it’s something small and you’ll get the technique down and can then do something bigger!
Maybe place mats or a smaller rug?
Try it out!!

5 comments:

9658 Textiles said...

wow, good for you for getting that jelly roll quilted up right away. I really like the colors, they make really good colors for the rug! Thanks for sharing the story of the rug <3

barbara woods said...

a small rug! are u doing ok?

Pamela Arbour said...

Thanks for sharing your adventure. I thought they might not be as easy as it appears. I think coasters and potholders and placemats might be the best way to go with that method. Thanks for the ideas.

Michele said...

I Do like the way your rug turned out color wise. I know they are very popular right now but honestly I have no interest in making one myself.

Cheryl's Teapots2Quilting said...

A lady in our guild was teaching this class. She said to 'test' for flatness every 2-3 rounds, to keep the rug flat.